Specifications


MODEL | ZTM-80/60 |
MEASUREMENTS | Metric | US | |
---|---|---|---|
Working height maximum* | 25.77 m | 84 ft | |
Platform height maximum | 23.77 m | 78 ft | |
Horizontal reach maximum | 18.29 m | 60 ft | |
Up and over clearance maximum | 8.83 m | 29 ft | |
Below ground reach | 4.83 m | 15 ft 10 in | |
A Platform length | 0.91 m | 3 ft | |
B Platform width | 2.44 m | 8 f | |
C Height - stowed | 3.00 m | 9 ft 10 in | |
D Length - stowed | 11.27 m | 37 ft | |
E Length - transport | 11.27 m | 37 ft | |
F Width | 2.49 m | 8 ft 2 in | |
G Wheelbase | 2.85 m | 9 ft 4 in | |
H Ground clearance - center | 0.30 m | 12 in |
PRODUCTIVITY | |||
---|---|---|---|
Lift capacity | 227 kg | 500 lbs | |
Platform rotation | 160° | 160° | |
Vertical jib rotation | 135° | 135° | |
Turntable rotation | 360° continuous | ||
Turntable tailswing - riser up | 1.17 m | 3 ft 10 in | |
Turntable tailswing - riser down | 2.24 m | 7 ft 4 in | |
Drive speed - stowed | 4.83 km/h | 3.0 mph | |
Drive speed - raised** | 1.1 km/h | 0.68 mph | |
Lift speed to full height | 76 sec | 76 sec | |
Gradeability - 4WD - stowed*** | 45% | 45% | |
Turning radius - 4WS inside | 2.13 m | 7 ft | |
Turning radius - 4WS outside | 4.57 m | 15 ft | |
Controls | 12V DC proportional | ||
Tyres - RT Lug - Foam filled | 445 / 500 710 |
Power | ||||
---|---|---|---|---|
Power source | Deutz TD 2011 L04i 4 cylinder diesel 58kW (78hp) | |||
Auxiliary power unit | 12 V DC | 12 V DC | ||
Hydraulic tank capacity | 170 L | 45 gal | ||
Fuel tank capacity – diesel machines | 132 L | 35 gal |
Weight*** | ||||
---|---|---|---|---|
17,010 kg | 37,500 lbs |

STANDARDS COMPLIANCE
ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only.
*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
**** Weight will vary depending on options and/or country standards.
Features
STANDARD FEATURES
MEASUREMENTS
• 25.77 m (84 ft) working height
• 18.28 m (60 ft) horizontal reach
• 8.83 m (29 ft) up and over clearance
• Up to 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform
• 4WD
• 4WS
• Full-time active oscillating axle
• Rough terrain foam-filled
• 1.83 m (6 ft) jib with 135° range
• Self-leveling platform
• Hydraulic platform rotation
• Fully proportional Hall effect controls
• On-board diagnostics
• ALC 1000 electronic control system
• Hydraulic oil cooler
• Drive enable
• Horn
• Hour meter
• Tilt alarm
• 360° continuous turntable rotation
• Locking turntable covers
• Full-time positive traction drive
• Two speed wheel motors
• Four steering modes: front, rear, crab
and coordinated
• Configurable controls to limit lift height
to 21.34 m (70 ft)
• Thumb rocker steer
• Alarm package
• Dual flashing beacons
Power
• 12 V DC auxiliary power
• Deutz diesel 58 kW (78 hp)
• Anti-restart engine protection
• Auto engine fault shutdown
• Engine monitoring display
• Dual battery
• Engine status display
OPTIONS & ACCESSORIES
PRODUCTIVITY
• Platform swing gate
• Half-mesh platform inserts with swing gate
• Platform top auxiliary rail
• Air line to platform
• Fire resistant hydraulic oil
• Biodegradable hydraulic oil
• Basic hostile environment kit
• Deluxe hostile environment kit
• Deluxe aircraft protection package
(6 ft platform only)
• Tool tray
• Fluorescent tube caddy
• Platform work lights
• Front driving lights
• Lockable platform control box covers
• 1.83 m (6 ft) steel platform
• High flotation rough terrain tyres
• Rough terrain non-marking foam-filled tyres
POWER OPTIONS
• 240 V power to platform
• 7 kVA hydraulic generator (240 V/50 Hz)
• Cold Weather Packages
• Retained key selector switch
