Specifications


Model | ZTM-40/23N RJ |
MEASUREMENTS | Metric | US | |
---|---|---|---|
Working height maximum* | 14.32 m | 46 ft 5 in | |
Platform height maximum | 12.32 m | 40 ft 5 in | |
Horizontal reach maximum | 6.91 m | 22 ft 8 in | |
Up and over clearance maximum | 6.48 m | 21 ft 3 in | |
A Platform length | 0.76 m | 2 ft 6 in | |
B Platform width | 1.17 m | 3 ft 10 in | |
C Height - stowed | 1.98 m | 6 ft 6 in | |
D Length - stowed | 6.53 m | 21 ft 5 in | |
E Width | 1.50 m | 4 ft 11 in | |
F Wheelbase | 1.96 m | 6 ft 5 in | |
G Ground clearance - center | 0.18 m | 7 in |
PRODUCTIVITY | |||
---|---|---|---|
Lift capacity | 227 kg | 500 lbs | |
Platform rotation | 180° | 180° | |
Vertical jib rotation | 128° | 128° | |
Horizontal jib rotation | 180° | 180° | |
Turntable rotation | 355° non-continuous | ||
Turntable tailswing | 0.13 m | 5 in | |
Drive speed - stowed | 7.2 km/h | 4.5 mph | |
Drive speed - raised** | 1.1 km/h | 0.68 mph | |
Gradeability - stowed** | 30% | 30% | |
Turning radius - inside | 0.87 m | 2 ft 11 in | |
Turning radius - outside | 3.20 m | 10 ft 6 in | |
Controls | 24 V DC proportional | ||
Tyres - front | 56 x 18 x 45 cm | 22 x 7 x 17.75 in | |
Tyres - rear | 64 x 18 x 45 cm | 25.6 x 7 x 17.75 in |
Power | ||||
---|---|---|---|---|
Power source | 48 V DC (eight 6 V batteries) 350 Ah capacity | |||
Drive system | 29 V 3 phase AC | 29 V 3 phase AC | ||
Auxiliary power unit | 24 V DC | 24 V DC | ||
Hydraulic tank capacity | 30.2 L | 8 gal |
Weight*** | ||||
---|---|---|---|---|
6,940 kg | 15,300 lbs |

STANDARDS COMPLIANCE
ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10
* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode *(platform raised), the machine is designed to operated on firm, level surfaces only.
*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
**** Weight will vary depending on options and/or country standards.
Features
STANDARD FEATURES
MEASUREMENTS
Z™-40/23N RJ
• 14.32 m (46 ft 5 in) working height
• 6.91 m (22 ft 8 in) horizontal reach
• 6.48 m (21 ft 3 in) up and over clearance
• Up to 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 1.17 m (3 ft 10 in) steel platform
• 1.22 m (4 ft) horizontal rotating
jib boom 130° with working range
• 2WD Electric AC
• Solid rubber non-marking
• 1.50 m (4 ft 11 in) width
• 0.87 m (2 ft 11 in) inside turning radius
• Self-leveling platform
• Hydraulic platform rotation
• Fully proportional controls
• Thumb rocker steer
• Drive enable
• Horn
• Hour meter
• Tilt alarm
• Alarm package
• Hydraulic filter condition monitor
• 355° non-continuous turntable rotation
• Variable speed high efficiency
hydraulic power unit
• AC electric drive system
• Traction control
• On-board easy to understand
diagonostics
• Dual flashing beacons
Power
• 48 V DC deep cycle battery pack
• 24 V DC auxiliary power
• Universal 30A battery smart charger
• Battery charge indicator
• Low battery voltage interrupt
OPTIONS & ACCESSORIES
PRODUCTIVITY
• Platform swing gate
• Half-mesh platform inserts with
swing gate
• Air line to platform
• Fire resistant hydraulic oil
• Biodegradable hydraulic oil
• Hostile environment package
• Tool tray
• Fluorescent tube caddy
• Platform work lights
• Front driving lights
• Lockable platform control box cover
• Retained key selector switch
POWER OPTIONS
• 240 V power to platform
