Specifications

Z-34-22IC-top
MODELZTM-34/22 IC
MeasurementsMetricUS
Working height maximum*12.62 m40 ft 10 in
Platform height maximum10.62 m34 ft 10 in
Horizontal reach maximum6.78 m22 ft 3 in
Up and over clearance maximum4.57 m15 ft
Platform length0.76 m2 ft 6 in
B Platform width1.42 m4 ft 8 in
Height - stowed2.06 m6 ft 9 in
Length - stowed5.66 m18 ft 7 in
Storage height2.29 m7 ft 6 in
Storage length4.11 m13 ft 6 in
Width1.85 m6 ft 1 in
Wheelbase1.88 m6 ft 2 in
Ground clearance - centre0.17 m6.5 in
Productivity
Lift capacity227 kg500 lbs
Platform rotation180°180°
Vertical jib rotation139°139°
Turntable rotation355° non-continuous
Turntable tailswingzerozero
Drive speed - stowed4.8 km/h3.0 mph
Drive speed - raised1.1 km/h0.68 mph
Gradeability - stowed**45%45%
Turning radius - inside1.80 m5 ft 11 in
Turning radius - outside4.11 m13 ft 6 in
Controls24 V DC proportional
Tyres - foam-filled10 x 16.5 in NHS
Power
Power sourceKubota D-1105 3-cylinder diesel 19.4 kW (26 hp)
Auxiliary power unit12 V DC12 V DC
Hydraulic tank capacity71.9 L19 gal
Fuel tank capacity34.1 L9.0 gal
Weight***
4,854 kg10,701 lbs

STANDARDS COMPLIANCE

ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10

 

* The metric equivalent of working height adds 2 m to platform height. U.S. adds 6 ft to platform height.
** In lift mode (platform raised), the machine is designed to operate on firm, level surfaces only.
*** Gradeability applies to driving on slopes. See operator’s manual for details regarding slope ratings.
**** Weight will vary depending on options and/or country standards.

Features

STANDARD FEATURES

MEASUREMENTS
Z™-34/22 IC
• 12.62 m (40 ft 10 in) working height
• 6.78 m (22 ft 3 in) horizontal reach
• 4.57 m (15 ft) up and over clearance
• Up to 227 kg (500 lbs) lift capacity

PRODUCTIVITY

• 1.42 m (4 ft 8 in) steel platform
• 4WD
• Rough terrain foam-filled tyres
• 1.22 m (4 ft) jib with 139° working range
• Self-leveling platform
• Hydraulic platform rotation
• Fully proportional controls
• Drive enable
• Horn
• Hour meter
• Tilt alarm
• Descent alarm
• 355° non-continuous turntable rotation
• Locking turntable covers
• Zero tailswing and front arm swing
• Two speed wheel motors
• Engine gauge package
• Alarm package
• Dual flashing beacons

Power

• 12 V DC auxiliary power
• Kubota D-1105 3-cylinder diesel
18 kW (25 hp)

OPTIONS & ACCESSORIES

PRODUCTIVITY

• Platform swing gate
• Half-mesh platform inserts with
swing gate
• Air line to platform
• Fire resistant hydraulic oil
• Biodegradable hydraulic oil
• Basic hostile environment kit
• Tool tray
• Fluorescent tube caddy
• Platform work lights
• Lockable platform control box cover
• Front driving lights
• Industrial non-marking foam-filled tyres

POWER OPTIONS

• 240 V power to platform
• Cold Weather Package
• Retained key selector switch

Z-34-22IC-side-bottom