Specifications

Z-135-70-top
MODEL ZTM-135/70
MEASUREMENTS Metric US
Working height maximum* 43.15 m 141 ft
Platform height maximum 41.15 m 135 ft
Horizontal reach max - riser extended 18.03 m 59 ft 2 in
Horizontal reach max - riser retracted 21.26 m 69 ft 9 in
Up and over clearance maximum -
riser extended 23.01 m 75 ft 6 in
riser retracted 9.91 m 32 ft 6 in
Below ground reach 5.87 m 19 ft 3 in
Platform length 0.91 m 3 ft
Platform width 2.44 m 8 ft
Height - stowed 3.07 m 10 ft 1 in
Length - stowed 12.93 m 42 ft 5 in
Width - axles extended 3.94 m 12 ft 11 in
   Width - axles retracted 2.46 m 8 ft 1 in
Wheelbase - axles extended 4.11 m 13 ft 6 in
   Wheelbase - axles retracted 4.72 m 15 ft 6 in
Ground clearance - centre 0.51 m 1 ft 8 in
PRODUCTIVITY
Lift capacity 227 kg 500 lbs
Platform rotation 160° 160°
Vertical jib rotation 110° 110°
Turntable rotation 360° continuous
Turntable tailswing - axles extended riser up 0.79 m 2 ft 7 in
Turntable tailswing - riser down 4.27 m 14 ft
Drive speed - stowed 4.8 km/h 3.0 mph
Drive speed - raised** 1.1 km/h 0.68 mph
Lift speed to full height 96 sec 96 sec
Gradeability - stowed*** 45% 45%
Inside turning radius - axles extended 2.29 m 7 ft 6 in
Inside turning radius - axles retracted 5.51 m 18 ft 1 in
Outside turning radius - axles extended 5.64 m 18 ft 6 in
Outside turning radius - axles retracted 7.77 m 25 ft 6 in
Controls 12V DC proportional
Tyres - RT Lug - Foam filled 445/65 D22.5
Power
Power source Deutz Diesel TD 2011 L04i 4-cylinder turbo diesel, 55 kW (74 hp)
Auxiliary power unit 12 V DC 12 V DC
Hydraulic tank capacity 246.1 L 65 gal
Fuel tank capacity 151.4 L 40 gal
Weight***
20,366 kg 44,900 lbs

STANDARDS COMPLIANCE

ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10

 

* The metric equivalent of working height adds 2 m to platform
height. U.S. adds 6 ft to platform height.
** Gradeability applies to driving on slopes. See operator’s manual
for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.

Features

STANDARD FEATURES

MEASUREMENTS

• 43.15 m (141 ft) working height
• 21.26 m (69 ft 9 in) horizontal reach
• 23.01m (75ft 6in) up and over clearance
• Up to 272 kg (600 lbs) lift capacity

PRODUCTIVITY

• 2.44m (8ft) steel platform
• 3.66 to 6.10 m (12 to 20 ft) Jib-Extend™
with 110° working range
• 4WD
• 4WS
• Extra-wide rough terrain foam-filled tyres
• Xchassis™ extendable axles
• Self-leveling platform
• Hydraulic platform rotation
• Fully proportional Hall effect controls
• On-board full diagnostics and engine
monitoring display
• ALC 1000 electronic control system
• Hydraulic oil cooler
• Drive enable
• Horn
• Hour meter
• Tilt alarm
• Alarm package
• 360° continuous turntable rotation
• Four wheel high angle steer
• Four steering modes: front, rear, crab
and coordinated
• Four wheel brakes
• Full-time positive traction 4WD
• Adjustable foot switch timeout
• Two speed wheel motors
• Configurable controls to limit lift height
to 27.74 m (91 ft)
• Engine status display
• Dual flashing beacons
• Thumb rocker steer

Power

• 12 V DC auxiliary power
• Deutz turbo diesel, 55 kW (74 hp)
• Engine protection package

STANDARD FEATURES cont.

• Deutz intake air heater
• Swing out engine tray

OPTIONS & ACCESSORIES

PRODUCTIVITY

• Platform swing gate
• Half-mesh platform inserts with
swing gate
• Platform top auxiliary rail
• Air line to platform
• Fire resistant hydraulic oil
• Biodegradable hydraulic oil
• Basic hostile environment kit
• Deluxe hostile environment kit
• Tool tray
• Fluorescent tube caddy
• Platform work lights
• Front driving lights
• Lockable platform control box covers
• 1.83 m (6 ft) steel platform

POWER OPTIONS

• 7 kVA hydraulic generator (240 V/50 Hz)
• Cold Weather Packages
• 240 V power to platform

Z-135-70-side-bottom