Specifications
| MODEL | STM-45 |
| Measurements | Metric | US | |
|---|---|---|---|
| Working height maximum* | 15.72 m | 51 ft | |
| Platform height maximum | 13.72 m | 45 ft | |
| Horizontal reach maximum | 11.18 m | 36 ft 8 in | |
| Below ground reach | 1.50 m | 4 ft 11 in | |
| A Platform length | 0.91 m | 3 ft | |
| B Platform width | 2.44 m | 8 ft | |
| C Height - stowed | 2.49 m | 8 ft 2 in | |
| D Length - stowed | 8.48 m | 27 ft 10 in | |
| Length - transport (jib tucked under) | 6.80 m | 22 ft 4 in | |
| E Width: standard tyres | 2.30 m | 7 ft 6 in | |
| F Wheelbase | 2.20 m | 7 ft 3 in | |
| G Ground clearance - center | 0.32 m | 1 ft 0.5 in | |
| Productivity | |||
|---|---|---|---|
| Lift capacity | 227 kg | 500 lbs | |
| Platform rotation | 160° | 160° | |
| Vertical jib rotation | 135° | 135° | |
| Turntable rotation | 360° continuous | ||
| Turntable tailswing | 0.86 m | 2 ft 10 in | |
| Drive speed - stowed | 7.7 km/h | 4.8 mph | |
| Drive speed - raised or extended | 1.1 km/h | 0.68 mph | |
| Gradeability - stowed** | 40% | 40% | |
| Turning radius - inside | 2.00 m | 6 ft 8 in | |
| Turning radius - outside | 4.78 m | 15 ft 8 in | |
| Controls | 12 V DC proportional | ||
| Tyres - RT lug - Foam filled | 12-16.5 in NHS | ||
| Power | ||||||
|---|---|---|---|---|---|---|
| Power source | Deutz D2011L03i 3 cylinder diesel 34.3 kW (46 hp) | |||||
| Auxilliary power unit | 12 V DC | |||||
| Hydraulic tank capacity | 170 L | 45 gal | ||||
| Fuel tank capacity | 76 L | 20 gal | ||||
| Weight | ||||
|---|---|---|---|---|
| Weight*** | 7,151 kg | 15,765 lbs |
STANDARDS COMPLIANCE
ANSI A92.5, CSA B354.4, CE Compliance, AS 1418.10
* The metric equivalent of working height adds 2 m to platform height. U.S adds 6 ft to platform height.
** Gradeability applies to driving on slopes. Gradability may vary depending on the weight of options installed on
machine. See operators manual for details regarding slope ratings.
*** Weight will vary depending on options and/or country standards.
Features
STANDARD FEATURES
MEASUREMENTS
S™-45
• S™-45 has 15.72 m (51 ft) working
height
• S™-45 has 11.18 m (36 ft 8 in)
horizontal reach
• Up to 227 kg (500 lbs) lift capacity
PRODUCTIVITY
• 2.44 m (8 ft) steel platform
• 1.52 m (5 ft) jib boom with 135°
working range
• 4WD Positive traction drive
• Full-time active oscillating axle
• Fully proportional controls
• 360° continuous turntable rotation
• Foam-filled Rough Terrain tyres
• Two speed wheel motors
• Closed-loop hydrostatic drive
• Engine protection package
• Auto engine fault shutdown
• Drive enable system
• Wire braided hose
• Hydraulic oil cooler
• Intake air heater
• Self-leveling platform
• Hydraulic platform rotation
• Swing-out engine tray
• Engine gauge package
• Locking turntable covers
• Foot switch time out
• Lockable platform control box covers
• Thumb rocker steer
• Tilt alarm
• Dual flashing beacons
• Electric horn
• Motion alarm
• Hour meter
Power
• Deutz Diesel 36 kW (49 hp)
• 12 V DC auxiliary power
OPTIONS & ACCESSORIES
PRODUCTIVITY
• Air line to platform
• Platform work lights
• Front driving lights
• Platform swing gate
• Half mesh platform inserts
with swing gate
• Platform rail pinch guard
• Hostile environment packages
• Deluxe aircraft protection package
• Fluorescent tube caddy
• Tool tray
• Mine spec option
• 1.8 m (6 ft) steel platform
POWER OPTIONS
• Cold start packages
• 7 kVA hydraulic generator (240 V/50 Hz)
• 240 V power to platform
